Installation Services
Everything From The
Feeder To The Machine
Overhead and underground lines, transformers and substations, switching, fibre and earthing — erected, terminated, tested and commissioned under one contract, so no part of the scope falls between two vendors.
The chain we work on end to end. Every stage below is a link in it — and the earthing under all of them is what makes the protection at each stage actually operate.
01
Overhead HT / LT Line
Route survey, foundations, pole erection, stringing and charging for 11 / 22 kV HT feeders and the 415 V network below them.
02
Underground HT / LT Line
Trenching, XLPE cable laying, straight-through jointing and termination up to 33 kV, with as-laid records handed over.
03
Transformer
Distribution transformers and substations — placement, HT and LT termination, protection, earthing, oil filtration and charging.
04
G.O.D Work
Gang operated disconnector and AB switch work — structure, erection, blade alignment, earthing and operational testing.
05
O.F.C Work
Optical fibre for SCADA, metering, CCTV and campus links — ducting, fusion splicing, termination and an OTDR trace per link.
06
Brazing Earthing
Conventional earth pits and strip runs with brazed joints, treated backfill, chambers and a measured resistance record.
07
Exothermic Earthing
Welded copper earth grids and lightning protection — joints that carry full fault current and never need re-tightening.
Not Sure Which
Scope You Need?
Send the load, the voltage level and the location. We survey the site and come back with a defined scope rather than a guess.